motorsdirect
Electrical
- Jul 8, 2004
- 78
hi.
I have come across a special bearing on a FANUC high speed drive motor fitted to a CNC machine.
It is marked NSK 6212V on the seal and has an inner race and bearings of a 6212,,and an outer race 130mm x 31mm, the same as a 6312.
I WOULD APPRECIATE ANY REPLYS
Jeff
I have come across a special bearing on a FANUC high speed drive motor fitted to a CNC machine.
It is marked NSK 6212V on the seal and has an inner race and bearings of a 6212,,and an outer race 130mm x 31mm, the same as a 6312.
I WOULD APPRECIATE ANY REPLYS
Jeff