I am trying to calculate stress in a trunnion anchor, horizontal pipe welded to a base plate, attached to vertical wall and welded to a vertical pipe riser, I have found a set of equations in "Piping and Piping Support Systems" and would like to use them. The equations referance Constants C1 thru C12 in "Welding Research Council Bulletin #107" Looked in local Libraries and on web but can't find a copy of this document. Found WRC web site but not willing to buy a copy for these. Anyone got a copy? My Beta variable is 0.72 and my Gama is 8.97.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trunnion anchor stress
- Thread starter websterj
- Start date
Hi websterj (Mechanical)
I recommend FE-PIPE from Paluin Research Froup The Home of "FE-PIPE" is the Engineering Tool for this job.
Should take less then 20 minits if you slow other wise 5 minits.
Leonard@thill.biz
I recommend FE-PIPE from Paluin Research Froup The Home of "FE-PIPE" is the Engineering Tool for this job.
Should take less then 20 minits if you slow other wise 5 minits.
Leonard@thill.biz
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
