Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

truck turning radius

Status
Not open for further replies.
albresco

albresco

Mechanical
Joined
Sep 24, 2000
Messages
21
Location
CA
Is there a standard published to determine minimum turning radius required of semi and B-train truck and trailers for design of access lanes inside a manufacturing complex?
 
Sort by date Sort by votes
I saw a post in another list regarding software available for truck turn templates. Go to list Codes and Standards>AASHTO, look for a thread entitled "Truck turn templates" and a repsonse by "gvd" dated August 6, 1999. I would have forwarded this post directly to you but I could not get your e-mail address.

Briansch
 
Upvote 0 Downvote
There is a book that has all of that information in it. It is called "Architectural Graphic Standards" by Ramsey/Sleeper and The American Institute of Architects. I have a Ninth edition but it's a few years old. Great reference.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mmbanaz
  • Locked
  • Question Question
Inside turning cutting force calculation
Replies
0
Views
258
mmbanaz
mmbanaz

Part and Inventory Search

Sponsor

Back
Top