Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Triangulated surface mesh to tetrahedral volume mesh

Status
Not open for further replies.
simonz

simonz

Geotechnical
Joined
Oct 28, 2015
Messages
2
Location
CA
I have 3D scanned a lot particles into triangulated surface meshes, while i need to convert them into tet volume meshes.
Any idea about which program is good at this?
Thank you a lot.
 
Sort by date Sort by votes
If it is an enclosed region that is formed with the tri mesh, then you could fill it with tets in A/CAE.

getfile.aspx
 
Upvote 0 Downvote
Thank you for your help, can you give me the full name of the program you mentioned?
Thanks~~
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

swahlgren
  • Question Question
Splitting part while keeping mesh
Replies
2
Views
14K
swahlgren
swahlgren
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
10K
IcarusAero223
IcarusAero223
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
AlanSYH_
  • Locked
  • Question Question
Mesh Convergence Test
Replies
6
Views
963
AlanSYH_
AlanSYH_
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
1
Views
7K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top