I was wondering if you are doing a trial batch should you run it at max wcr. or should you compensate for the water reducer you use in the mix. How then should it be reported on the mix design. I have been told to do it both ways by diff eng. BTW I am not an eng. but just took over a position as QC Manager for a producer.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trial Batches
- Thread starter Labratt1
- Start date
- Status