Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trays
- Thread starter picasa
- Start date
jamesbanda
Chemical
This question is more applicable to chemical process design and operations if you mean distillation trays..
Waht do you mean by NDE,,
As a minimum they should best the tray fits together correctly and can be assessmebled internally in the dimeter column that you are working within.
Waht do you mean by NDE,,
As a minimum they should best the tray fits together correctly and can be assessmebled internally in the dimeter column that you are working within.
- Thread starter
- #3
NDE stands for non-destructive testing such as radiographic examination, ultrasonic testing, mag particle testing etc. these tests are common in vessel fabrication, but what about tray fabrication? I will try to post my Q in some other more applicable forum.
Positive Material Identification (PMI) is probably about the closest thing to NDT (testing) or NDE (examination) you'll see done to trays. Trays that require welded fabrication my have liquid-penetrant inspection.
Quality assurance & control (QA/QC) measures are more applicable to trays than NDT/NDE.
Quality assurance & control (QA/QC) measures are more applicable to trays than NDT/NDE.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question