Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transient thermal simulation - Export data from a path

Status
Not open for further replies.
Zappi01

Zappi01

Materials
Joined
May 10, 2010
Messages
3
Location
DE
Hello,

I did a transient thermal simulation in ANSYS workbench (V 13.0) and now want to export the temperature profile along a path for all time steps of the simulation. As I do the usual export command I get only the profile for the last time step. Is there any easy solution? Do I have to use a APDL command snippet?

Thank you for your help in advance.

Best
Zappi
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99
pnomura
  • Locked
  • Question Question
Drop Test in Transient Structural
Replies
1
Views
1K
jamesdean2
jamesdean2
shiraz883
  • Locked
  • Question Question
Stresses increase on adding thermal boundary conditions/ thermal load
Replies
1
Views
482
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top