Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transient response equations from modal superposition method

Status
Not open for further replies.

elogesh

Mechanical
Joined
May 10, 2002
Messages
187
Location
IN
Dear All,

Can you share or point out the reference for the equations involved in the calculation of transient response from mode co-efficients.

Is there any correspondence between the modal participation factors listed from modal analysis to the mode co-efficients from transient response.




Regards,
Logesh.E
 
Probably easiest to explain in the frequency domain. Assign a damping factor to each mode. Calculate the sdof response curve of the driving point to the excitation spectrum. Multiply that by your complex mode shape coefficient for the coordinate of interest. Repeat for all the modes. Vector sum the response spectra.

Now,I haven't touched a modal in eighteen years so I may be a bit rusty.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top