Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transfer from I-DEAS 11 to 10

Status
Not open for further replies.
toothroot

toothroot

Mechanical
Joined
Nov 27, 2001
Messages
40
Location
DE
Hi all,

is there any way to transfer model files (part geometries and FE meshes) from I-DEAS 11 to I-DEAS 10?

Any help would be appreciated,
Daniel
 
Sort by date Sort by votes
If you make an archive file you might be able to do it. Usually it goes the other way around from 10 to 11 not 11 to 10
 
Upvote 0 Downvote
Spróbuj tak:
[in 11NX] File->Export->VDA lub .unv
[in 10NX] File->Imoprt->VDA lub .unv

U mnie to dzia?a bez problemu :)

pzdr
Pawel M
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bjlasota
  • Locked
  • Question Question
What's the latest and greatest I-DEAS to Solidworks converters?
Replies
4
Views
1K
CADPat
CADPat
swale2
  • Locked
  • Question Question
Licensing tool-no license to select
Replies
4
Views
2K
swale2
swale2
Juan_Marcos
  • Locked
  • Question Question
Old version of I-DEAS 9.0?
Replies
2
Views
1K
Tornado220M
Tornado220M
Black87
  • Locked
  • Question Question
TDI Wizard on Win10 - How to manually configure files without running TDI Wizard?
Replies
6
Views
1K
rothers
rothers
engInfoAlt
  • Locked
  • Question Question
NX I-deas 6.5 - Access denied
Replies
7
Views
1K
I-DEAS
I-DEAS

Part and Inventory Search

Sponsor

Back
Top