Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Training Opportunities
- Thread starter Qshake
- Start date
![[pipe]](/data/assets/smilies/pipe.gif "[pipe] [pipe]")
DaveVikingPE
Structural
Check out Microstation on the Web, from the Microstation Help menu, they have a lot of online tutorials that aren't half bad. Also, Bentley offers classes around the county, they're usually four days long.
There's also their website: Their courses cost about $1400 per person.
However, there are some books out there and they'll probably get you through - though I recommend a course in the basics ("Essential Microstation") as the best kick-start.
There's also their website: Their courses cost about $1400 per person.
However, there are some books out there and they'll probably get you through - though I recommend a course in the basics ("Essential Microstation") as the best kick-start.
- Status