Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Touchpanel choices ????

Status
Not open for further replies.
gerg13

gerg13

Mechanical
Joined
Aug 8, 2008
Messages
8
Location
US
I am looking fro input regarding what brand to go with...I am replacing a xycom hmi and AB is pricey. Are c-more or udicon good choices? Are they programmed similar to AB? All input appreciated. Thanks
 
Sort by date Sort by votes
There is a recent post on this forum titled "Big screen, touch screen, monitor", thread791-226808, which might help you with this.
Are there any specific requirements?
What is the application environment?
 
Upvote 0 Downvote
Check out the screens by RedLion controls
They have some nice features such as historic data stored in csv format, multi communication protocol, good price.
Regards
Roy
 
Upvote 0 Downvote
I agree with the RedLion Screens. They are inexpensive, easy and powerful to progam and will communicate with almost anything.

Giz.
 
Upvote 0 Downvote
gerg, I think perhaps we need a little more information.
When you say "Touchpanel", are you referring to...

Something like a PanelView which requires software to build and download the application.

A touchscreen Panel PC, running a Windows application for example.

Or just a touchscreen monitor, attached to a PC.

I think there was also some confusion about this in the previous thread that I mentioned.
 
Upvote 0 Downvote
Thanks for the input I am a rookie and will elaborate. The machine came with a xycom 9460, which lost its backlight, and was replaced with a pc and a mouse. The company that built this machine went out of biz, I think they were putting the variables in an excel pro and moving into the plc. What do I need?
 
Upvote 0 Downvote
Okay, so it looks like you need to either get a new touchscreen panel PC or keep the existing PC and just get a touchscreen monitor for it.

From my experiences, Siemens makes a good touchscreen panel PC, if you want to replace everything.

If you just want to replace the monitor, I have had good experiences with Christensen Displays.
 
Upvote 0 Downvote
Look into parker CT hmi software, it is beautiful stuff, programs alot like a panelview and you could use a maple systems touchscreen for the interface
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top