Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
touch sensor
- Thread starter raywootnc
- Start date
We need a few more details of your requirement.
If you mean a touch switch where you touch two conductive contacts then this can be done using CMOS logic which can then be used to switch (electronically or via a relay) your alarm circuit.
For example;
(not necessarily a good one, just one I found in a quick search)
If you have other requirements such as no exposed contacts then you may want to look at capacitive switches such as;
Your requirements will help narrow down the choice.
regards
Pete
(TurboXS)
If you mean a touch switch where you touch two conductive contacts then this can be done using CMOS logic which can then be used to switch (electronically or via a relay) your alarm circuit.
For example;
(not necessarily a good one, just one I found in a quick search)
If you have other requirements such as no exposed contacts then you may want to look at capacitive switches such as;
Your requirements will help narrow down the choice.
regards
Pete
(TurboXS)
- Status
Similar threads
