TOUCH SCREEN TECHNOLOGI FOR NX............. 3

[CAD2015]

I am very excited about this new enhancement.
1) Which are the hardware requirements (PC capabilities)in order to use the Touch Screen technology?
2) And which are the main benefits of using Touch Screen versus the classic version?
3) Could the Touch Screen technology be used with old NX releases?

Thjanks

MZ7DYJ

 

[phillpd]

NX10 works pretty good on the Dell Venue Pro Tablet.

Hook it up to a large monitor and you can use the Tablet's screen as your Spacemouse

NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)

 

[PSI-CAD]

Hi
I have also a Venus Pro I Tablet ans I confirm that NX10 run very well
With older version You will not have special touch screen fonction (only rotate ans zoom)

Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[JohnRBaker]

To learn more about the NX 10.0 improvements that we've made specifically to support 'Touch Screen' technology, please go to:

http://community.plm.automation.sie...ouch-Screen-CAD-The-Future-is-Now/ba-p/289039

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[CAD2015]

Thank you all for replies!


MZ7DYJ

 

[CAD2015]

I have an "All-in-one" computer Acer DA220HQL 21.5" Android - Touchscreen Desktop.
(

http://www.amazon.com/Acer-DA220HQL-21-5-Inch-Android-Touchscreen/dp/B00CHYKVPQ).

This is actually a big size Android tablet: (

http://ecx.images-amazon.com/images/I/81tcBEQ0yDL._SL1500_.jpg)

Would this Android tablet work with NX 10.0?


MZ7DYJ

 

[JohnRBaker]

Does it run Windows?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[CAD2015]

No, it doesn't.............

MZ7DYJ

 

[JohnRBaker]

Sorry, NX only runs on Linux, Windows and Mac-OS, and at the moment, the touch screen technology is only supported on Windows.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[CAD2015]

Phillpd and Didier,

Have you installed the NX 10 on those tablets? Which "Dell Venue Pro Tablet" do you have? There are a few of them (Dell Venue 8 Pro 3845, Dell Venue 11 Pro, Dell Venue 8 Pro Tablet 32, etc)................
Also, wouldn't be better to use a laptop instead of a tablet?
What would be the difference between using a tablet vs using a laptop?

Thanks again!

MZ7DYJ

 

[phillpd]

It's a Dell Venue 11 Pro. I'm currently running NX9 and NX10 on it.

I have a Dell M6600 that I use in the office, but when at home or travelling, the Tablet is more convenient. I have a keyboard cover for travelling and it has a permanent dock when in the office.

Whilst it's not as powerful as my M6600, it certainly works extremely well when it's needed.

NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)