Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Total Cost of Ownership for Valves and Pumps

Status
Not open for further replies.

dogtop

Chemical
Jan 18, 2005
164
Dear Eng-Tipers:

I have been tasked with the production of TCOs for Valves and Pumps for a new chemical plant project. I have never done these TCOs. Can some knowledgeable engineering expert versed in this type of calculations point me to publications, books, standards, guidelines, etc to get me started in this task?. I would very much appreciate all the help provided.

Thanks in advance,

dogtop.
 
Replies continue below

Recommended for you

Dogtop,
Google "total lifecycle cost of valves & pumps"
You will find lots of data.

Sometimes its possible to do all the right things and still get bad results
 
Article "A Life Cycle Cost Summary" by H. Paul Barringer, 2003 (ICOMS-2003)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor