I need a good resource for independent topics of discussion for weekly enviro/safety meetings with staff. Does anyone know of a resource where short papers can be downloaded on topics like - Waste Oil recycling/ Aerosol Disposal/ Bond/Permit Limits/ Spill Prevention/ Drainage Control etc.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Topics for discussion
- Thread starter gump13
- Start date
gump13,
Have you tried some of the safety-focused regulatory groups: MSHA, OSHA, and others? They often have data available for the asking. MSHA is quite open with their 'fatalgram' packages, along with a considerable amount of training packets or packages, often directed at weekly or toolbox programs.
We used these on a regularly for our weeklies and crew safety meetings.
Also, professional societies and trade organizations have quite a bit of info along these lines. You may have to call/e-mail for assistance. Try SME (smenet.org), CIM, Master Mechanics, the National Stone, Sand and Gravel Association, state mine & quarry associations, etc. The Department of Labor has many industrial groups in addition to MSHA with their particular focus on safety.
Frankly, if your facility(ies) are organized, the union(s) may have a fair amount of stuff which would be useful.
Have you particular equipment lines which would be appropriate for safety matters? Many vendors & manufacturers have data and safety-meeting-appropriate packets or presentations at the ready.
On the environmental side, the regulatory agencies (State and Federal) often have public information packets which may be useful and appropriate (MSDS use, general water monitoring/quality issues, etc.). Asking them can be a pleasant surprise, as they often don't get requests for information on anything other than a brushfire/excursion/spill event... .
Hope these ideas help now. They were steps I successfully took back in the old phone and stamp-licking days... .
Have you tried some of the safety-focused regulatory groups: MSHA, OSHA, and others? They often have data available for the asking. MSHA is quite open with their 'fatalgram' packages, along with a considerable amount of training packets or packages, often directed at weekly or toolbox programs.
We used these on a regularly for our weeklies and crew safety meetings.
Also, professional societies and trade organizations have quite a bit of info along these lines. You may have to call/e-mail for assistance. Try SME (smenet.org), CIM, Master Mechanics, the National Stone, Sand and Gravel Association, state mine & quarry associations, etc. The Department of Labor has many industrial groups in addition to MSHA with their particular focus on safety.
Frankly, if your facility(ies) are organized, the union(s) may have a fair amount of stuff which would be useful.
Have you particular equipment lines which would be appropriate for safety matters? Many vendors & manufacturers have data and safety-meeting-appropriate packets or presentations at the ready.
On the environmental side, the regulatory agencies (State and Federal) often have public information packets which may be useful and appropriate (MSDS use, general water monitoring/quality issues, etc.). Asking them can be a pleasant surprise, as they often don't get requests for information on anything other than a brushfire/excursion/spill event... .
Hope these ideas help now. They were steps I successfully took back in the old phone and stamp-licking days... .
Try looking at
Theres a few links that may be useful for construction, mining safety etc
Theres a few links that may be useful for construction, mining safety etc
Plant Operation & Maintenance Club forum is starting on 25th December 2005. If you want to participate and interact enroll at
A number of environmental experts and consultants will share their experiences with special emphasis on:
1. Environmental legislation, policy and regulatory framework
2. Environmental Management System, ISO 14001 (2004)
3. Air and water pollution control and management
4. Responsibility of the industry as a corporate social citizens
5. Case studies
6. Specific problems which industry wanted to address to seek expert opinion
7. Global issues such as Global warming, Clean Development Mechanism (CDM), Ozone layer depletion etc.
This forum is open for the entire engineering community enrollment is free. This website is created for those who believe in sharing. It is piggy backed on Technology India but has a fairly wide international database
A number of environmental experts and consultants will share their experiences with special emphasis on:
1. Environmental legislation, policy and regulatory framework
2. Environmental Management System, ISO 14001 (2004)
3. Air and water pollution control and management
4. Responsibility of the industry as a corporate social citizens
5. Case studies
6. Specific problems which industry wanted to address to seek expert opinion
7. Global issues such as Global warming, Clean Development Mechanism (CDM), Ozone layer depletion etc.
This forum is open for the entire engineering community enrollment is free. This website is created for those who believe in sharing. It is piggy backed on Technology India but has a fairly wide international database
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question