-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tolerance Stack-Up Analysis 1
- Thread starter a0r0t
- Start date
Just make a simple 3 column sheet ,,, nominal, plus & minus.
Enter the drawing data making sure that you interpret the tolerances correctly so the stack is directional.
Sum the + & - columns and you have your range
Keep the wheels on the ground
Bob
showshine@aol.com
Enter the drawing data making sure that you interpret the tolerances correctly so the stack is directional.
Sum the + & - columns and you have your range
Keep the wheels on the ground
Bob
showshine@aol.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question