Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tolerance Question
- Thread starter spleen10
- Start date
You need to give a bunch of information on function/application etc. for anyone to be able to help you, and frankly forum1103 may be a better place to ask.
Concentricity actually has fairly limited application, one of the runouts is often a better choice or in many cases position is quite adequate.
Concentricity actually has fairly limited application, one of the runouts is often a better choice or in many cases position is quite adequate.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
Yeah, concentricity means cylindrical bore OD to ID have identical centre lines to within tolerance.
Do you mean "TIR" or the included taper run out along the radius?
Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
Do you mean "TIR" or the included taper run out along the radius?
Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
- Status
Similar threads
