Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

To choose pump to Discharge Chemicals

Status
Not open for further replies.
yulinios

yulinios

Chemical
Joined
Apr 9, 2004
Messages
41
Location
PE
Hi There!
I'm not sure if this site is rigth to ask your advices, well
I would like to know good marks and references to buy pumps to discharge chemicals like NaOH (25%), H2SO4 (98%) and FeCl3, We need fairly 4 m3/h and 4 meters in hight, any suggestion will be grateful received.
Thanks
Bye there.
 
Status
Not open for further replies.

Similar threads

MSL93
  • Question Question
Design Pressure due to Deflagration
Replies
5
Views
5K
seuenergy
seuenergy
adrich91
  • Question Question
NPSH and maximum vaccum of the pump
2
Replies
20
Views
17K
adrich91
adrich91
C
  • Locked
  • Question Question
Guidance on pump selection
Replies
14
Views
8K
georgeverghese
georgeverghese
Vivaldi M. Smith
  • Locked
  • Question Question
Criteria to choose Low Low trip on a Pressure Transmitter
Replies
12
Views
794
georgeverghese
georgeverghese
mrtangent2
  • Locked
  • Question Question
Packed Bed L/D to avoid channeling
Replies
2
Views
2K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top