Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
To be more verstile in piping engineering 1
- Thread starter PECT
- Start date
Guest
Hello,
Are you aware of the ASME Pressure Vessel and Piping Discussion Board at
and the COADE CAESAR 2 discussion board at:
(COADE invites all questions regardless of what software you use).
Good luck.
Are you aware of the ASME Pressure Vessel and Piping Discussion Board at
and the COADE CAESAR 2 discussion board at:
(COADE invites all questions regardless of what software you use).
Good luck.
-
1
- #3
pect,
John Breen is right....
Aside from this Forum and the two above, I know of no other Forum.
A good site for piping designin general is:
Good Luck !!...........................MJC
John Breen is right....
Aside from this Forum and the two above, I know of no other Forum.
A good site for piping designin general is:
Good Luck !!...........................MJC
- Status
Similar threads
- Question
- Question
- Question
