Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Titanium for hydrogen

Status
Not open for further replies.
Harg

Harg

Chemical
Joined
May 6, 2003
Messages
6
Location
NO
Here are my service conditions:
99+ % Hydrogen, 30 bar (440 psi), about 80 C (176 F).
Saturated with water vapor, less than 1% oxygen, traces (ppm?)of fluoride.

We have experienced corrosion on standard titanium pipes. Any suggestions on what Ti alloy may work under these circumstances?
 
Status
Not open for further replies.

Similar threads

D
  • Question Question
Titanium-Stainless Steel Galvanic corrosion
Replies
17
Views
27K
3DDave
3DDave
C
  • Locked
  • Question Question
riveting alu to titanium
2 3
Replies
48
Views
18K
christopher67
C
mrmalcolm
  • Question Question
Is intergranular corrosion test required for duplex steel
Replies
4
Views
3K
SJones
SJones
awesomeness
  • Question Question
Effect of microstructure on crevice corrosion for SDSS
Replies
5
Views
19K
weldstan
weldstan
rifa92
  • Locked
  • Question Question
Alternative material for Unalloyed Titanium in Heat Exchanger Tubes
Replies
13
Views
879
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top