Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Titanium for hydrogen

Thread starter Harg
Start date Jul 4, 2005

Status: Not open for further replies.

Jul 4, 2005

Harg

Chemical

Here are my service conditions:
99+ % Hydrogen, 30 bar (440 psi), about 80 C (176 F).
Saturated with water vapor, less than 1% oxygen, traces (ppm?)of fluoride.

We have experienced corrosion on standard titanium pipes. Any suggestions on what Ti alloy may work under these circumstances?