mncad
Industrial
- Dec 27, 2002
- 256
Is there any way to tell how long you have spent in an assembly, drawing or model? In AutoCAD the "time" command would tell you how long you had been in the file, anything similar in SW2003?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Time spent in a drawing
- Thread starter mncad
- Start date
- Status
No SW doesn't provide that option. I'm sure if you want something like that there is some 3rd party software out there for tracking your time spent in a drawing.
Also you before you can continue to work in SW you have to forget about AutoCAD LOL I'm just![[poke]](/data/assets/smilies/poke.gif "[poke] [poke]")
ing fun at you.
Best Regards, Scott Baugh, CSWP![[spin]](/data/assets/smilies/spin.gif "[spin] [spin]")
![[americanflag]](/data/assets/smilies/americanflag.gif "[americanflag] [americanflag]")
3DVision Technologies
faq731-376
When in doubt, always check the help
Also you before you can continue to work in SW you have to forget about AutoCAD LOL I'm just
ing fun at you.Best Regards, Scott Baugh, CSWP
3DVision Technologies
faq731-376
When in doubt, always check the help
- Status