Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Timber Box Tunnel Design

Status
Not open for further replies.

Big K

Civil/Environmental
Joined
Jul 20, 2023
Messages
7
Location
US
I need to install a 6" sewer lateral that will run under a storm drain. I will need to tunnel under the storm drain for approximately 15 feet long and 10' deep. I am looking for some sample calculations or suggestions to install a temporary timber box liner. Any help is greatly appreciated.

Thanks
 
Big K,

This is the welding forum. Are you planning to weld the timber box liner?

--
JHG
 
Why?

Can't you just auger it? Or similar?

But yes you're in the wrong forum....

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
definitely use oak weld filler.
 
Sorry about that. Thanks for the help though.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top