Tierod falling off wheel simulating opposite wheel travel

[Kmk1609]

Hello, I am facing an issue, As shown in Image the Tierod falls off while simulating suspension study. This is a custom template please suggest any solution for this problem.
Thanks

 

[GregLocock]

Does it behave sensibly up until that point?

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[Kmk1609]

It just remains is same position when the simulation is being performed and updates to original position as soon as Animation controls are closed.

 

[GregLocock]

Sounds like it is failing to assemble correctly. What does the msg file say?

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[Kmk1609]

Msg file shows the solutions are converged and deactivating some redundant constraints. I can not see anything other than that.

 

[GregLocock]

"deactivating some redundant constraints"
That's probably it then. It deactivated the constraints holding the tie rod.



Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?