Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Threaded hole

Status
Not open for further replies.

skanskan

Civil/Environmental
Joined
Jul 29, 2007
Messages
278
Location
ES
Hi.

Is the threaded hole supposed to create a hole with a thread?

If not, and if I use later the "thread" command to add a thread, How does the kind of hole (general vs threaded) affect to the final hole+thread result?

Regards
 
As far as Drafting is concerned, you will get the same result visually in eitehr case. However, at least for 'female' threads, it's recommended that you use the 'Threaded Hole' option of the normal 'Hole' feature function. In NX 9.0 we've added some new hole callout annotation functions to both regular Drafting and PMI and for threaded holes this will really only work with the 'Threaded Hole' feature and not the 'Symbolic' thread added to an existing hole, which is what we had to do prior to NX 5.0.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top