Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread727-315991 I am trying to

Status
Not open for further replies.
hydro1234

hydro1234

Mechanical
Joined
Oct 20, 2012
Messages
1
Location
BE
thread727-315991

I am trying to calculate the natural frequency of a submerged propeller, can anybody help me how to conduct that in ANSYS OR Abaqus?

cheers
 
Status
Not open for further replies.

Similar threads

compe_ad
  • Locked
  • Question Question
Why am I seeing fluctuation in the displacements?
Replies
6
Views
429
IceBreakerSours
IceBreakerSours
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
compe_ad
  • Locked
  • Question Question
Why I am getting high viscous damping and artificial energy (ABAQUS)?
Replies
1
Views
544
FEA way
FEA way
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH

Part and Inventory Search

Sponsor

Back
Top