Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread292-430395 Dear friend i wan

Status
Not open for further replies.
JohnPeter1

JohnPeter1

Mechanical
Joined
Oct 23, 2018
Messages
14
Location
IQ
thread292-430395
Dear friend i want do wps by asme ix+31.3
So my material is 106 gr b is that material required impact or not how i know ?
 
Sort by date Sort by votes
B31.3 determines whether impact testing is required or not. Your process conditions and pipe size need to be known in order to evaluate that.
 
Upvote 0 Downvote
It will depend on the thickness and MDMT chosen.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Vishakash
  • Locked
  • Question Question
thread292-511490 Has anyone know t
Replies
0
Views
157
Vishakash
Vishakash
Santiago Vacca
  • Locked
  • Question Question
Per B31.3 Impact test exemption of weld metal below (continuation of closed thread292-509093)
Replies
2
Views
757
Santiago Vacca
Santiago Vacca
MhmdNfri
  • Question Question
ASME Sec. I / NDT / PW-11 / Table PW-11
Replies
2
Views
488
goutam_freelance
goutam_freelance
EMANUELE GUERRINI
  • Locked
  • Question Question
ASME I Boiler with 15 PSI Pressure - Can I Use an ASME IV Safety Valve?
Replies
2
Views
881
The Obturator
The Obturator
JohnWE
  • Locked
  • Question Question
Number of thermocouples during PWHT according to ASME section I and B31.1
Replies
2
Views
1K
JohnWE
JohnWE

Part and Inventory Search

Sponsor

Back
Top