Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread184-311142 If the beam pocke

Status
Not open for further replies.
jcangayo

jcangayo

Industrial
Joined
Aug 9, 2020
Messages
1
Location
QA
thread184-311142
If the beam pocket has been present in the room protected by fire suppression system, it is required to provide zone-1 & zone-2 detector in each pocket?
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
I have a question about the installation of the beam detector.
Replies
6
Views
2K
ProSafPlant1
ProSafPlant1
SprinklerDesigner2
  • Question Question
I know I have the the right answer but I just want to make sure.
Replies
2
Views
472
SprinklerDesigner2
SprinklerDesigner2
SprinklerDesigner2
  • Question Question
Hydrant flow test with static and residual obtained DOWNSTREAM the flowing hydrant on a dead end line.
Replies
7
Views
14K
cdafd
cdafd
VVhope
  • Locked
  • Question Question
Residual pressure at most remote connection on standpipe system if the building is sprinklered
Replies
5
Views
1K
skdesigner
skdesigner
JoeH78
  • Locked
  • Question Question
Variable Beam Height For Smoke Detectors
Replies
8
Views
676
JoeH78
JoeH78

Part and Inventory Search

Sponsor

Back
Top