Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thread Dimension 1

Status
Not open for further replies.
geo12

geo12

Mechanical
Joined
May 27, 2003
Messages
99
Location
CA
Hi,
Can anybody help me how to dimension the thread.

The thread is created in Part and it is visible in Draft.
Is there any way to represent the same in draft without manually entering it.

Thanks
 
Sort by date Sort by votes
Use the callout feature. In it, you'll see some buttons that are used to define the thread feature. Create the callout using these.

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

NZMark
  • Locked
  • Question Question
Dimension scaling of drawing objects in Draft
Replies
3
Views
2K
kjoiner
kjoiner
John_W2
  • Locked
  • Question Question
Combining model dimensions in drawings
Replies
0
Views
937
John_W2
John_W2
John_W2
  • Locked
  • Question Question
Drawing Dimensions/Annotations - a Newbie question
Replies
1
Views
2K
kjoiner
kjoiner
adl2an
  • Locked
  • Question Question
Dimensions/Callouts for Pipe threaded holes
Replies
1
Views
600
kjoiner
kjoiner
Paul_McGiven
  • Locked
  • Question Question
Purple Dimensions
Replies
0
Views
417
Paul_McGiven
Paul_McGiven

Part and Inventory Search

Sponsor

Back
Top