Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Danlap on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Those old timers knew a thing or two 1

Status
Not open for further replies.
Replies continue below

Recommended for you

One article I read (sorry, don't have the link) suggested the cuts were successful, but planned poorly. As it was collapsing, the cuts closed up on themselves and jammed.
 
No problem Lomarandil, I do that all the time. Thanks for the YouTube link.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor