Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermal resistivity of bottom ash

Status
Not open for further replies.
grandpawasacarpenter

grandpawasacarpenter

Structural
Joined
Jul 18, 2004
Messages
1
Location
US
I need to find out if bottom ash from coal fired power plant would make good back fill material for medium and high voltage underground electrical duct banks. Is anyone familiar with the thermal resistivity propertys of bottom ash?[bigears]
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
Air voids of these (red) higher readings
Replies
2
Views
2K
EireChch
EireChch
ONENGINEER
  • Locked
  • Question Question
Frequency of laboratory Testing along Boreholes
Replies
8
Views
2K
EireChch
EireChch
CEMAB
  • Locked
  • Question Question
Determining gradation of rockfill
Replies
2
Views
931
morecoffeeplz
morecoffeeplz
KShab
  • Locked
  • Question Question
Use of Air Voids with a nuclear densitometer
Replies
3
Views
1K
iandig
iandig
BigH
  • Locked
  • Question Question
ASTM Definition of Clay Size Particle
Replies
6
Views
2K
morecoffeeplz
morecoffeeplz

Part and Inventory Search

Sponsor

Back
Top