Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermal properties of FR-4 (fiber glass reinforced glass epoxy) 2

Status
Not open for further replies.

main9

Aerospace
Joined
Feb 1, 2000
Messages
9
Location
US
Layered FR-4 is used in the manufacture of circuit cards (Printed wiring Boards). Interested in the composite thermal properties (thermal conductivity, specific heat, coefficient of thermal expansion,etc) of the multilayer (8, 10 or 12)boards. The typical thicnesses of the boards are 0.062 or 0.093 inches. Looking for literature,references, equations/formulas, etc., that can be quickly/conveniently applied to get reasonable values.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top