Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermal properties of FR-4 (fiber glass reinforced glass epoxy) 2

Status
Not open for further replies.

main9

Aerospace
Feb 1, 2000
9
Layered FR-4 is used in the manufacture of circuit cards (Printed wiring Boards). Interested in the composite thermal properties (thermal conductivity, specific heat, coefficient of thermal expansion,etc) of the multilayer (8, 10 or 12)boards. The typical thicnesses of the boards are 0.062 or 0.093 inches. Looking for literature,references, equations/formulas, etc., that can be quickly/conveniently applied to get reasonable values.
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor