Nosrat Akhgar
Mechanical
hello . I am trying to model l-shape bending of sandwich sheets in 2d plane strain mode. when I submit the job I face with this error
.the punch crush the sheet except bending it
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
the ratio of deformation speed to wave speed exceeds 1.0000 in at least one element .
- Thread starter Nosrat Akhgar
- Start date
- Status
This error is discussed in a previous thread on the forum:
Also, there is an example of this analysis in the "Getting Started with Abaqus" Manuals:
Section 13 - Quasi-Static Analysis with Abaqus Explicit
Section 13.5 - Example: Forming a channel in Abaqus/Explicit
Also, there is an example of this analysis in the "Getting Started with Abaqus" Manuals:
Section 13 - Quasi-Static Analysis with Abaqus Explicit
Section 13.5 - Example: Forming a channel in Abaqus/Explicit
- Status
Similar threads
- Locked
- Question
- Locked
- Locked
- Question
- Locked
- Question