Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

The peak flap-wise bending and the peak tension loadings in ABAQUS

Status
Not open for further replies.
laythsalman

laythsalman

Structural
Joined
Jul 11, 2015
Messages
1
Location
IQ
Hello everyone,

I am looking for your help, how do I could basically calculate and impose the peak flap-wise bending load and tension one due to centrifugal moment on the wind turbine blade that created in ABAQUS.

Kind Regards,
Layth
 
 http://files.engineering.com/getfile.aspx?folder=5fd2040f-f887-47e5-a33c-5e98ff445d01&file=centrifugal_load_in_abaqus.png
Status
Not open for further replies.

Similar threads

abc123ali
  • Locked
  • Question Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way
mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
392
mj345
mj345
polak7
  • Question Question
ECAP - material flows between the punch and the die?
Replies
0
Views
85
polak7
polak7
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D

Part and Inventory Search

Sponsor

Back
Top