Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

The issue of shell163 element thickness offset in ANSYS/LSDYNA

Status
Not open for further replies.
xiaoxiaoJX

xiaoxiaoJX

Student
Mar 4, 2023
1
When I use ANSYS/LS-DYNA to simulate shell elements, I attempt to set a thickness offset for the shell elements. I have already set the offset value in the preprocessing and reloaded the model. However, when I open the shell element thickness, I cannot see the offset effect of the shell elements. I have tried selecting the correct attribute in the display options, but the problem still persists. Could you please tell me what could be the possible reasons and how to solve this problem?
 
Status
Not open for further replies.

Similar threads

Galbert99
  • Question
problem with cyclic region of a gear in ansys mechanical
Replies
4
Views
3K
Galbert99
Galbert99
J
  • Question
Ansys workbench
Replies
13
Views
3K
JarossR
J
S
  • Locked
  • Question
The Isc setting interface of the inverter in ETAP disappears
Replies
0
Views
2K
Sipeng
S
A
  • Question
What should I do if I have never been exposed to calculating the situation of objects in liquids, but I want to know the state of objects in the water 1
Replies
2
Views
1K
Aaron Chen
A
Toranag9
  • Locked
  • Question
Swivel Wheel Offset 2
Replies
6
Views
445
waross
waross

Part and Inventory Search

Sponsor

Back
Top Bottom