Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Textual dimensioning of holes

Status
Not open for further replies.

5754

Automotive
Joined
Dec 12, 2005
Messages
1
Location
MX
How can I make Catia to dimension holes & threads in textual form. For example 2 x Ø1.25 Thru in the Catia V5 Drafting Module ?. Thanks in advance
 
You cannot do it automatically.

You will have to turn the "manipulators" on. (Tools -> Options -> Mechanical Design -> Drafting -> Manipulators)

By doing this, when you click on the dimension, there will be 2 inverted red triangles that appear. Picking them will allow you to add text.

Good luck.




**************
Check out CATBlog!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top