We have ACAD files w/multiple images attached. Images & text are in model space. Text masks appear OK in model & paper space. The plot preview is OK. Most masks print properly. Some do not (images do not print masked). Same problem on multiple plotters. Same problem printing to pdf. Does anyone have a work-around?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Text masks not plotting properly 1
- Thread starter Cadman12
- Start date
-
1
- #2
Hi Cadman12,
wipeouts and textmasks (normally) are images.
1st I would check out the command "_imagequality" -> high
2nd I would change the textmask options to a solid hatch, colour 254, screening 1% in the *.ctb...
ACAD is a vectorsoftware, not an image software :-(...
Lothar
ADT 2004
wipeouts and textmasks (normally) are images.
1st I would check out the command "_imagequality" -> high
2nd I would change the textmask options to a solid hatch, colour 254, screening 1% in the *.ctb...
ACAD is a vectorsoftware, not an image software :-(...
Lothar
ADT 2004
- Status
Similar threads
- Locked
- Question
- Locked
- Question
