Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Test for Gap Type Lightning Arrestors

Status
Not open for further replies.
KnicksJets

KnicksJets

Electrical
Joined
Jul 12, 2002
Messages
62
Location
US
We have gap type Lightning arrestors on our 138 kV breakers. Doble testing is not recommended for the gap types. Anybody recommends any other form of testing? I can provide more info if that helps. Thanks in advance, thanks for atleast checking the question out.
 
Sort by date Sort by votes
Wouldn't IEEE C62.1, Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits.
apply?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

rockman7892
  • Locked
  • Question Question
Analysis for determining location of arrestors on overhead distribution lines
Replies
8
Views
6K
wcaseyharman
wcaseyharman
stevenal
  • Locked
  • Question Question
Wait to reenergize following lightning?
Replies
15
Views
7K
crshears
crshears
CuriousElectron
  • Question Question
Ventilated Dry type transformer inside a building
Replies
2
Views
7K
dpc
dpc
PKJENNY
  • Question Question
HV Power transformer connection type
Replies
1
Views
3K
bacon4life
bacon4life
chuckd83
  • Question Question
Transformer test report - zero sequence values
Replies
8
Views
11K
prc
prc

Part and Inventory Search

Sponsor

Back
Top