Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Terramodel-export in dwg
- Thread starter 3455034
- Start date
bernbear64
Civil/Environmental
Damir,
When exporting DWG file, under the Point Options, select "Export point as block with attributes". I usually leave the "Center elevation around point marker" off, and use a text height of 0.1. Thie will give you a layer for Descriptions,Elevations and Point Number as well as your existing point layer.
Hope this helps.
Bernie
When exporting DWG file, under the Point Options, select "Export point as block with attributes". I usually leave the "Center elevation around point marker" off, and use a text height of 0.1. Thie will give you a layer for Descriptions,Elevations and Point Number as well as your existing point layer.
Hope this helps.
Bernie
- Status
Similar threads
