Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Terminating Contract Early

Status
Not open for further replies.

Mechie10

Mechanical
Jul 26, 2004
38
I been contracting with a company through a contract company for about 6 months. The written contract specifies an open-ended time (as needed basis) and the termination clause provides 2 days notice. The contract gets "renewed" on a verbal basis with the manager in set month intervals and a purchase order is written. Is it an accepted industry practice to terminate the contract prior to the verbally agreed contract time?
 
Replies continue below

Recommended for you

In mechanical design, the "employee" is usually free to go at any time. The contract is between the agency and the employer, not with the individual. Agencies use the contract to ensure a minimum amount of time on the agency's payroll.

If you are on contract as an individual, you may be S.O.L.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor