Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Temporary Shoring

Status
Not open for further replies.

teckert

Structural
Joined
Jul 30, 2009
Messages
30
Location
US
Does anyone know if why temporary shoring is designed with LRFD theses days- it seems so much more confusing for a temporary structures. In addition, its not as if ASD is unsafe?

Thanks,
Tim
 
teckert - who is insisting that LRFD must be used? Seems like it would be up to the engineer doing the designing. Most of the construction engineers I've worked with use ASD for shoring.

 
ASD is more conservative, so use it if you wish.

BA
 
BA- with higher live loads, LRFD results in a more conservative design due to the higher SF on live loads than on DL?

 
Use ASD, not because it is conservative but because you need to deal with the actual forces when designing shoring. For example is you shore a concrete structure and you need to jack the shoring to relieve stresses, you need to use ASD to determine the stresses.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top