Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Temporary Shoring Design for Existing Bridge

Status
Not open for further replies.
scplanchecker

scplanchecker

Structural
Joined
Sep 11, 2006
Messages
3
Location
US
An existing timber framed bridge in Santa Cruz, CA, that will need temporary shoring on one lane/half of bridge, while the other half is being reinforced. Do seismic loads need to be considered in this shoring? The bridge will be closed to traffic during the construction.
 
Sort by date Sort by votes
If the bridge is intended to be closed or under the shored condition for an extended period of time, yes.

Regards,
Qshake
[pipe]
Eng-Tips Forums:Real Solutions for Real Problems Really Quick.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ajw771983
  • Locked
  • Question Question
Seismic design forces for Non-structural components above grade
Replies
0
Views
1K
ajw771983
ajw771983
mgokyurek
CE Marking for Piping
Replies
0
Views
4K
mgokyurek
mgokyurek
teach_me
  • Locked
  • Question Question
Looking for Factor of Safety value for excavation shoring design on american codes
Replies
0
Views
273
teach_me
teach_me
Ahmed Elarbagi
  • Question Question
FG Pressure limit inside buildings for oil & gas facilities
Replies
0
Views
3K
Ahmed Elarbagi
Ahmed Elarbagi
G
  • Question Question
What standard is used for high-temperature pressure vessels in Europe?
Replies
4
Views
4K
GlassPowder
G

Part and Inventory Search

Sponsor

Back
Top