Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Temperature dependent material properties

Status
Not open for further replies.
Uday029

Uday029

Mechanical
Joined
May 30, 2014
Messages
12
Location
IN
Please let me know about the relevant card for the definition of temperature dependent properties of a material in NX Nastran( At each temperature, I need to define the curve for True stress Vs Plastic Strain to define the material non-linearity ).
Is there an option to write that card through the GUI of NX CAE 8.0.3?
Also please let me know about any 1d element type that can take the temperature dependent material properties for non-linear analysis. I have tried with CBAR which will not take any temperature dependent properties.
 
Status
Not open for further replies.

Similar threads

orlandoa11
  • Locked
  • Question Question
NX point coordinates as properties
Replies
0
Views
378
orlandoa11
orlandoa11
Christian_RR
  • Locked
  • Question Question
Exporting ANT and Mass Properties
Replies
4
Views
652
Christian_RR
Christian_RR
El_Paben
  • Locked
  • Question Question
Material color
Replies
3
Views
266
jerry1423
jerry1423
CADologist
  • Locked
  • Helpful tip Helpful tip
NX Journal - Assign Material to All bodies in part; Assign Description to "Description Attribut
Replies
0
Views
622
CADologist
CADologist
Ozcar
  • Locked
  • Question Question
conversion of material databse for StarCCM and AmeSim
Replies
0
Views
279
Ozcar
Ozcar

Part and Inventory Search

Sponsor

Back
Top