Mar 9, 2004 #1 dncr Structural Joined Mar 10, 2003 Messages 1 Location US I am looking for published data on "Tek Screws". Pullout strength, shear capacity, Pullover limits etc. I am aware of the information in the Hilti Catalogue but am looking for more extensive information.
I am looking for published data on "Tek Screws". Pullout strength, shear capacity, Pullover limits etc. I am aware of the information in the Hilti Catalogue but am looking for more extensive information.
Mar 10, 2004 #2 griffengm Industrial Joined Jan 12, 2003 Messages 398 Location US sixth edition of FASTENER STANDARDS from Industrial Fasteners Institute, 1978, shows SAE J78 as an appropriate standard. Griffy Upvote 0 Downvote
sixth edition of FASTENER STANDARDS from Industrial Fasteners Institute, 1978, shows SAE J78 as an appropriate standard. Griffy