May 28, 2024 #1 GTrinh97 Structural Joined May 28, 2024 Messages 17 Location US Any screw that can go from the steel plate first then go through the wood beam? https://files.engineering.com/getfile.aspx?folder=f564f4de-4827-44d8-ab7c-f3bad36eb37d&file=Screenshot_2024-05-28_131540.png
May 28, 2024 #2 SWComposites Aerospace Joined Nov 6, 2000 Messages 3,722 Location US lots can if you predrill the holes in the steel plate. Upvote 0 Downvote
May 28, 2024 #3 dik Structural Joined Apr 13, 2001 Messages 26,117 Location CA ...else you have to use a bigger hammer! -----*****----- So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates -Dik Upvote 0 Downvote
...else you have to use a bigger hammer! -----*****----- So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates -Dik
May 28, 2024 #4 3DDave Aerospace Joined May 23, 2013 Messages 11,480 Location US What never gets the respect they need are shaped charge screws. Upvote 0 Downvote