Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TEG troubleshooting

Status
Not open for further replies.
1Chemical2Process

1Chemical2Process

Petroleum
Joined
Aug 7, 2003
Messages
1
Location
US
I am working on the revamp of a TEG dehydration system which has been shut in for a while. Lean glycol lab results show a pH of 4.5, chlorides(6mg/l),water content (2%) and hydrocarbon (1000mg/kg). Any suggestions or experiences to restore the glycol to acceptable conditions (i.e. pH,HC content) will be appreciated. Thank you.
 
Status
Not open for further replies.

Similar threads

MIANCH
  • Locked
  • Question Question
Low Pressure TEG Dehydration of Natural Gas
Replies
3
Views
511
georgeverghese
georgeverghese
poli60
  • Locked
  • Question Question
Low capacity pumps for regenerated TEG
Replies
6
Views
314
poli60
poli60
B62plant
  • Locked
  • Question Question
TEG Contactor Efficiency
Replies
5
Views
312
georgeverghese
georgeverghese
DoraeS
  • Locked
  • Question Question
Offshore TEG Gas Dehydration - What is the effects of Inlet Gas Temperature
Replies
1
Views
224
MortenA
MortenA
Papps
  • Locked
  • Question Question
Iron Content Troubleshooting in TEG Dehydration System
Replies
2
Views
352
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top