Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TEG regeneration alternatives

Status
Not open for further replies.

MGlycol

Chemical
Joined
Jan 25, 2004
Messages
6
Location
IT
What do you think about TEG regeneration alternatives (i.e. Drizo, Coldfinger, etc.)in terms of advantages and disadvantages vs. the stripping gas common method employed?
 
Check the thread below on Coldfinger. Also search this website with keywords.
 
Try contacting KCC Process Equipment, I think they have licenses for all the different TEG process and as such I am sure they could point you in the right direction with pros and cons for each one

I think you will find that each system has its advantageous and disadvantageous and therefore the selection will depend on you detailed process requirments/cost analysis/environmental issues etc

MB
 
Unless you are looking for a 100 Deg F dew point depression, there is no need for patent medicines on TEG units. A simple Stahl Column will get the extra drying needed for a large dew point depression. QB Johnson is a packager in Oklahoma City that ships units world wide.

If you are in an enviromentally sensitive area, don't forget the BTEX.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top