Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tee junction Diverging flow for unknown outputs
- Thread starter hqureshi
- Start date
MikeHalloran
Mechanical
It depends almost entirely on whatever is downstream,
both from the other run and from the branch.
I.e., you have to model the whole system downstream of the run inlet.
Mike Halloran
Pembroke Pines, FL, USA
both from the other run and from the branch.
I.e., you have to model the whole system downstream of the run inlet.
Mike Halloran
Pembroke Pines, FL, USA
- Status
Similar threads
- Locked
- Question
- member 1218030
- Fluid Power engineering