Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tedlar Film Removal

Status
Not open for further replies.

repairguy

Aerospace
Jan 21, 2005
2
Trying to remove Tedlar film Coating From A CFM56 Fan Outlet Guide Vane (Dupont TTY 40 BE 5). We have tryed to remove using plastic blast media, but find it extremely time consuming, and there is a chance of damaging the Kevlar substrate. Have also tryed soaking the part in MEK, but this also did not help to soften the film.

Anybody?
Best Regards



 
Replies continue below

Recommended for you

Have you checked with Cytec Engineered Materials in Havre de Grace, Maryland? They are the Tedlar manufacturers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor